For all pH or ORP and temperature measurements in basins, open channels and tanks.
Support 9336 insures adjustable position and protection of electrode in basins, channels and tanks. It allows temperature measurement or automatic compensation with he Pt100 sensor built-in the bottom of probe. The probe is designed to avoid electrode damaged during calibration routine.
Standard construction is of PVC, O.D. 50 mm tube. Fastening collar or adjustable flange, allows the probe to be positioned at the right height.
For the calibration routine, the electrode protection end is removable from the holder. This one is perfectly adapted to our buffer flasks (9011; 9012; 9013; 9015). There is no need to hold the probe during calibration. Flask and probe are tightly assembled and they can stand on the floor. No more spilled buffer neither damaged electrode.
Associated electrodes for pH and ORP are described on data-sheet 150-01. Only electrodes with sealing PG 13.5 are adapted with our probe holders.
200 mm, as a minimum
Built-in Pt100 Ohm at 0°C, 3 wires
Standard 1 m (from 500 to 3000 mm on request)
PBT fiber glass reinforced; IP 65
Two PG 9
Adjustable flange 9358 or PE collar for tube O.D. 50 mm
55 °C, as a maximum
Temperature, 3 wire type, shielded, 0.22 mm²
pH, coaxial cable type 9060
CODE NUMBERS AND REFERENCES
PVC 1 m long probe with Pt100 sensor
Adjustable PE flange for probes 9336 & 9337
Coaxial cable, specific for pH
Shielded cable, 3-wire 0.22 mm²
General Catalog 130-02 20/11/2018 17:23
Immersion probe with built-in temperature sensor 9337
BAMO Mesures SAS
22, Rue de la Voie des Bans Parc d'activités de la Gare
95100 ARGENTEUIL France