Exclusively developed for swimming pools water measurements, the BAMOCHLOR is an easy-to-use indicator / transmitter designed as a panel or wall mounting unit. Calibration and configuration is easy. Two independent adjustable set-points with opposite or same control direction are integrated. The unit has a selectable 0 or 4 to 20 mA analog output. As an option the unit is available with a galvanic isolated mA Output. The mA output signal can be set over the measured range. Different setting modes can be programmed with dip-switches by removing the gray front panel. The BAMOCHLOR is equipped with removable wiring connectors.

Main power supply: 230 V/ 50 Hz 5 VA
Display: 3 1/2 digit 13 mm LCD
Echelles: 0 - 1 ppm or 0 - 5 ppm selectables
Analog output: 0-20 mA or 4-20 mA (400 ohm max.)

Relays output:
Volt free change over contact
rated at 500VA / 250V / 2A /230 V max.

Probe input: 5 pins DIN plug (included)
Accuracy: ± 1 %
Option: Galvanic insulation - 1000 V dc