Holder for pH or ORP electrodes to install in line or as a by-pass.
Holder 9240 with suitable electrode allows in-line measurements of pH or ORP under pressure.
Holder is suitable for electrodes with fitting PG 13.5 (see data-sheet 150-01).
For pipes with diameter above 25 mm, the holder has to be inserted on a bypass; a pressure drop may be assumed with a ball-valve (or elbows, or restrictions) to insure a proper flow around the electrode. It is recommended to install valves, upstream and downstream of the bypass, to allow easiest calibration and maintenance routines.
For a direct on-line measurement, see the holders 9400 series (data-sheet 141.01).
Note: An average flow rate limit to respect is max. 500 l/h
PVC / Transparent PVC
0... +50 °C
Max. 7 bar at 20 °C
O.D. 25 mm spigot end, for solvent welding
CODE NUMBERS AND REFERENCES
9240 PVC Y
Te Holder for for 1 electrode PG 13.5
General Catalog 140-02 20/11/2018 17:33
In-line electrode holder for 1 electrode pH or ORP 9240
BAMO Mesures SAS
22, Rue de la Voie des Bans Parc d'activités de la Gare
95100 ARGENTEUIL France