BMG 72 Wall mount galvanometric indicator

General Catalog 206-01

BMG 72

Wall mount galvanometric indicator

BMG 72

Previous Product

Next Product

PDF Version

User Manual

Ask a Quotation

• Wall mount box IP 55

• Dial 72 x 72

• 1 Analogue input

• 1 Analogue output 0/4-20 mA

• 2 Relay outputs

APPLICATIONS

This galvanometric indicator is designed for local display and control of an analogue input signal. It is particularly well suited for control rooms on diesel-oil stored for generators and boilers.

Lot of additional applications are available: Water storage monitoring, local display of temperature, flow-rate, pressure, etc.

DESCRIPTION

The device integrates an electronic module (CUB-233, data-sheet 233-03) that monitors a galvanometric analogue display for level or volume on the front case.

Scales are in % or litres from 0 to 50 l and up to 120 000 l (for cylindrical and parallelepipedic according to EN 12285, NF 88513, etc.) Other parameters and scales on request.

Relays outputs are adjustable all along the measuring scale (thresholds, hysteresis

and timer).

There are 5 available cable glands.

Wire connections on terminal block integrated to the case (See picture on page 2).

Supply according to your specifications :

- Graduated scale will be defined according to following table.

- Analogue output will be in conformity to your request: current or voltage.

- Relay outputs will be setup (default) for thresholds, hysteresis and timer (all adjustable on site).

TECHNICAL FEATURES

Wall mount case	:	Polycarbonate grey; IP 55
Terminal block	:	13 screw terminals; 4 mm²
Cable glands	:	PE 11 (x2) and PE 9 (x3)
Dial - Pointer	:	Galvanometer 72x72 mm; black pointer
Supply	:	80 ... 256 V AC - 50/60Hz; 20 ... 240 V DC no polarity
Consumption	:	< 4 VA
Ambient temperature	:	-10 ... +45 °C

Integrated electronic: CUB 233

Versatile converter (data sheet 233-02)

Signal input:

Current	:	0-20 or 4-20 mA
Potentiometer	:	From 470 Ohm to 100 kOhm
Other parameters	:	Voltage, resistor, temperature

Outputs:

Current	:	0-20 or 4-20 mA (load < 700 Ohms)
Relays x2	:	Change over - Switching capacity 500 mA / 250 V
Voltage	:	0-10 V (load > 2 kOkm) - Other on request

EC Conformity: The instrument meets the legal requirements of the current European Directives

General Catalog 206-01
12/11/2018 16:34

Wall mount galvanometric indicator
BMG 72