BAMOFLONIC 42i is an ultrasonic flow meter based on the phase difference approach. This phase difference is directly proportional to the flow rate. It is convenient for liquids electrically conductive or not. As no moving parts are concerned, BAMOFLONIC is mechanically reliable. Construction features reduce all dead zones along the measuring tube; BAMOFLONIC 42i offers a great accuracy on small flow rates.
Materials, PE-HD and PVDF, allow large application fields:
Some chemicals (or concentration level) are not compatible with ultrasonic principle; this is your responsibility to verify the principle is adequate with your fluid.
TECHNICAL FEATURES
Power supply: 24 V DC / 3.6 W
Connector: M12 (5 pins)
Display: Numerical, Back-lighted
Protection: IP65
OUTPUTS Digital output: Pulses, empty tube alarm, reverse flow alarm, dosage, Min or max flow rate
Analogue output: 0/4-20 mA, to configure on site
ACCURACY
Standard: ±2 % of reading and ±3 mm/s
Option: ±1 % of reading and ±3 mm/s (according VDI/VDE 2642)
Repeatability: 0.5%
MEASURING CELL
Wetted parts: Or PE-HD version, or PVDF version
FLUID
Temperature limits: 0 to +60°C
Pressure limit: 7 bar at 20 °C
Factory options: - Kit with software & adaptor USB/ RS485 for parameters configuration
- Remote display module
General Catalog 776-04 17/04/2018 11:55
Ultrasonic flow meter BAMOFLONIC 42i
BAMO Mesures SAS
22, Rue de la Voie des Bans Parc d'activités de la Gare
95100 ARGENTEUIL France
