Search
MENU Catalog Global Sites
BAMO
FRANCE
French manufactured of sensors and control instruments for fluids
You are actually in BAMO EN » Our Products » Old Docs » pH - O.R.P. & Chlore » CS2.3
General Catalog 193-04
CS2.3
CS2.3
Free chlorine sensor, without effect from pH changes
CS2.3
Warning! You are consulting an archived documentation:

This product is not anymore manufactured or marketed by BAMO
Do not hesitate to contact us if you are looking for a substitution product certified or if you have a question

  • For drinkable water monitoring
  • Range: from 0.01 up to 10 ppm
  • Output signal: 4-20 mA
  • Pressure limit: 0.5 bar as a maximum
  • Unnecessary zero adjustment
DESCRIPTION

Principle
Free chlorine measurement by amperometric method with a diaphragm cell
of 3 electrodes; wasted sample. The probe includes a CTN sensor for the
temperature compensation.

Mounting / Recommendations
The measuring at a constant flow rate requires the use of a specific cell
(see data sheet 193-95). The complete assembly optimizes the operations.

Note: The water sample may not content surface-active additives.

TECHNICAL FEATURES

Range:
0.01 to 10 ppm (free chlorine)
pH changes do not affect the measure
within pH values 4 to 11

Pressure limit: 0.5 bar as a maximum
Temperature limits: From 1 to 45°C
Flow rate limits: From 30 to 40 L/h (see the data sheet 193-95)
Power supply: 12 ... 30 V DC, [Rmax = (U-7,5) / 20 kΩ]
Materials: PVC-U, electro-polished AISI 316L
Dimensions: Ø 25 mm, length 225 mm

General Catalog 193-04
20/11/2018 16:30
Free chlorine sensor, without effect from pH changes
CS2.3
Technical & Commercial support's main contacts
Ask a QUOTATION online
BAMO Mesures SAS
22, Rue de la Voie des Bans
Parc d'activités de la Gare
95100 ARGENTEUIL France
Tel: +33 1 30 25 83 20
Fax: +33 1 34 10 16 05
E-mail: export@bamo.fr
URL: http://www.bamo.fr
Siret: 314 055 864 000 65
TVA Intra: FR 08 314 055 864
APE: 2651 B
Capital: 400 000 Euros
Built by CARIMEDIA since 1998
© 1998-2024 All rights reserved - Disclaimer