Search
MENU Catalog Global Sites
BAMO
FRANCE
French manufactured of sensors and control instruments for fluids
You are actually in BAMO EN » Our Products » General Catalog » Chlorine, disinfection » CL4.1
General Catalog 193-02
CL4.1
CL4.1
Free chlorine sensor, at constant pH
CL4.1

  • For process water
  • Range: 0.5 to 200 ppm
  • Output signal: 4-20 mA
  • Pressure limit: 1 bar as a maximum
  • Unnecessary zero adjustment
DESCRIPTION

Principle
Free chlorine measurement by amperometric method with a diaphragm cell
of 2 electrodes; wasted sample. The probe includes a CTN sensor for the
temperature compensation.

Mounting / Recommendations
The measuring at a constant flow rate requires the use of a specific cell
(see data sheet 193-95). The complete assembly optimizes the operations

CAUTION

The sample may not content surfactants and the pH must be lower
than 8

TECHNICAL FEATURES

Range: 0.5 to 200 ppm (free chlorine)
Measuring signal depends of pH; regulation of pH is necessary.
Operating pH range: From 6 to 8 and regulated
Pressure limit: 1 bar as a maximum
Temperature limits: From 1 to 45°C
Flow rate limits: From 30 to 40 L/h (see the data sheet 193-95)
Power supply: 12 ... 30 V DC, [Rmax = (U-7,5) / 20 kOhm]
Materials: PVC-U
Dimensions: Ø 25 mm, length 225 mm

General Catalog 193-02
17/04/2018 10:32
Free chlorine sensor, at constant pH
CL4.1
Technical & Commercial support's main contacts
Ask a QUOTATION online
BAMO Mesures SAS
22, Rue de la Voie des Bans
Parc d'activités de la Gare
95100 ARGENTEUIL France
Tel: +33 1 30 25 83 20
Fax: +33 1 34 10 16 05
E-mail: export@bamo.fr
URL: http://www.bamo.fr
Siret: 314 055 864 000 65
TVA Intra: FR 08 314 055 864
APE: 2651 B
Capital: 400 000 Euros
Built by CARIMEDIA since 1998
© 1998-2024 All rights reserved - Disclaimer