Warning! You are consulting an archived documentation:
This product is not anymore manufactured or marketed by BAMO
Do not hesitate to contact us if you are looking for a substitution product certified or if you have a question
BAMOX 7200
- Galvanic dissolved oxygen sensor - Sturdy construction - Easy fitting and maintenance - Range: 0...20 ppm (0-100%) - Large electrolyte volume - Easy membrane replacement - HDPE membrane - Built in temperature sensor: Pt 100 ? / 0°C - Construction: POM
PRINCIPLE
The sensor BAMOX 7200 uses a lead anode to improve the resolution (0.03 ppm in lower range) and a High-Density Polyethylene (HDPE) membrane; signal delivered is 45 mV at 100%.
Comparatively to a PTFE membrane (33 mV at 100%), the HDPE membrane has a quicker answer (approx. half the response time).
The BAMOX 7200 sensor is designed for wastewater applications.
TECHNICAL FEATURES
BAMOPHOX 7200 sensor
Range: 0.03...20 ppm Cathode:Silver Anode: Lead Electrolyte: Sodium carbonate Membrane 45 mV:HDPE Maximal temperature: 50°C Minimal fluid speed: 0.05 m/s PG colour: Grey Cable length: 3 m Temperature sensor: Pt 100 Ohm / 0°C; 2 wires
Sensor holder
Immersion probe: Standard length 1 m; maximal length 3 m Construction: PVC Electrical connection: screw connectors Housing: PBT, IP65
General Catalog 460-02 25/05/2009 11:52
Dissolved oxygen sensor BAMOX 7200
BAMO Mesures SAS
22, Rue de la Voie des Bans Parc d'activités de la Gare
95100 ARGENTEUIL France
