| ATEX Products |
 |
| Des têtes bien faites... |
|
|
|
| ITU 402 - ITU 412, Panel mounting indicator |
General Catalogue 222-03 |
ITU 402 - ITU 412, Panel mounting indicator
- Versatile digital display Indicator
- Inputs: mA, V, Pt 100, Ni 100, TC,
- Main power inputs: 21.6...253 VAC / 50...60 Hz or 19.2...300 VDC
- LED Display, 4 digits
- Power supply to the sensor:
15...25 VDC ( 0...20 mA )
- Housing 48 x 96 mm
- Protection: IP 65
- Outputs: 2 relays
or 2 relays + 1 analogue output 0/4-20 mA |
| ITU 402 and ITU 412 are versatile and configurable on site indicators. Both have 2 relay outputs plus an analogue output for The ITU412. They are convenient for a local display and process controller, useful where ambient conditions oblige a protection IP 65. The 4 digits display by LED of 13.8 mm high has a resolution from 1999 to 9999 with an adjustable decimal point; it shows as well the relay status of each output. All parameters are adjusted through the front keyboard. A multi language help file could be selected through the menu. During the start up, a test may be run on each relay without a real input signal. These IP65 indicators are of a DIN 43700 standard: 48 x 96 mm, to fit in a cabinet or a wall in a control room. |
Main power input: 21.6...253 VAC / 50...60 Hz
or 19.2...300 VDC
Power consumption: 3.5 W as a maximum
Inputs Electric current: -1...25 mA
Voltage: -20 mV...12 VDC
RTD (Pt 100. Ni 100) and resistance
TC Types B, E, J, K, L, N, R, S, T, U, W3, W5 and LR
Operating temperature: -20...+60 °C
Outputs:Relay: 2 change over contacts 230 VAC
Analogue: 0/4-20 mA, 800 Ω as a maximum
Sensor power supply:15...25 VDC / 0...20 mA
Housing: IP65, made of black polycarbonate
Mass: 230 g
Wire connections: Fast coupling connectors (no screws)
Conformity: To standards EMC 2004/108/CE, EN 61326-1,
DBT 2006/95/CE, EN 61010-1 |
|
 |
Panel mounting indicator
ITU 402 - ITU 412 |
General Catalogue
222-03 |
|
|