A complete system BBS will power an alarm unit NivOil® 10...27 V DC when no main power supply exists in the field.
Mud level detection in primary and secondary clarifier, thickener and other applications
Useful also in rotten black sludge
Sludge level monitoring in small sewage plants
Immersion depth: 10 m as a maximum
High mechanical resistance and totally safe
For dangerous products: hot water, alkalis or acids, etc...
Materials: Stainless steel, PVC, PP, PVDF
Connections: Flange or BSP threaded
Output signal: 4-20 mA and/or level switches
A pressure relief valve SDD 911 limits the static pressure to a maximal settled value by opening the outlet (to the discharge line) when the pressure is overriding.
Pressure: Class PN 10 (at 20°C)
Set up range: 0.5 to 10 bar
PPH: 10 to 70°C
PVC: 10 to 50°C
Dimensions: ND 10 ... ND 25
Diaphragm: EPDM, PTFE coated
DIN 8068 threaded
PVC union to glue on site
PPH union to weld on site
|BAMOPHOX 319 ML-DB
2 independent sensors inputs Input 1: range 0...2 MΩ .cm Input 2: scalable range 0...20 MΩ .cm / 0...2 MΩ .cm Dedicated probes and sensors With Factor probe C= 0.01, 0.1, 1 and 10 2 adjustable analog output 0/4-20 mA, galvanic insulated 3 relay...
Air bubbling level transmitter
Level measurement Air bubble principle Air generator with flow rate regulator for level measurement in open channel flumes Wall mounting housing IP 55, with pressure sensor Convenient for charged or foaming effluents Measuring range: 0 to 500 mm WC...
Flowrate measure probe
Primary flow sensor with diffenrential pressure output No moving parts For liquids, gases, staem From ND 15 up to ND 12 000 Up to 400 bar / 1000 °C Complet set of measure including : Differential pressure transmitter, indicator or metering. 3 models...
Indirect reading High mechanical resistance and totally safe For dangerous products: hot water, alkalis or acids, etc... Materials: Stainless steel, PVC, PP, PVDF Connections: Flange or BSP threaded Output signal: 4-20 mA and/or level switches Totally...
Compact Overfill Sensor
Capacitive, high frequency, fail-safe detection For aggressive and conductive liquids Positive active alarm Auto diagnostic system and LED Approvals: DIBT Z-65.13-294, for overfillingdetection WHG§19, and VLAREM II
pH-meter & ORP-meter
The BAMOPHOX 106 offers high flexibility on use mixing different built-in programmes for regulation, thresholds, temperature compensation, and alarms
Electromagnetic flow meter
The most competitive on the market Calibrated individually on the test bench to a precision better than ±5 pulses /1000 Convenient for small flow rates between 0.1 and 150 l/min No pressure loss Only for conductive liquids (minimum 20 μS/cm)...
Conductivity inductive probes
Process measurement on line or by immersion For waste liquids Wide range of applications Large scales: from 0-2 to 0-2000 mS Probe material: NORYL Process measurement on line or by immersion Wetted part: NORYL For waste liquids Wide range of...
Solar powered separator alarm
A complete system BBS will power an alarm unit NivOil® 10...27 V DC when no main power supply exists in the field. Autonomous complete system Field installation Solar panel powered and battery Pole clamp fitting or wall mounting Battery protection...