| ATEX Products |
 |
| Des têtes bien faites... |
|
|
|
| BAMOTOP 281, Frequency signal to current signal converter |
General Catalogue 281-01 |
BAMOTOP 281, Frequency signal to current signal converter
- Frequency input, in particular from:
BAMOFLU [Doc 780-01]
BAMOTUR [Doc 781-01]
BAMOMATIC 12 V [Doc 775-01]
- Input configuration by 3 switches
- Ranges: 1 to 25000 Hz
- Output: 0/4-20 mA or 0-5/10 V, galvanic insulated
- Response time: 5 ms to 10 s
- Main power: 85 to 250 V AC
- Sensor supply: 12 V DC |
The converter BAMOTOP 281 transforms numerically a frequency signal to transmit an analogic current or voltage.
Inputs types are: free voltage contacts, all switches, CMOS, TTL, Hall Effect sensors, NPN/PNP...
The output range is configured on site by switches.
There are two more configurable parameters:
- Minimal response time, to fix the minimal period for signal output actualization; it also filters any over gap or high frequency signals.
- Maximal response time, to fix the low frequency limit.
The converter BAMOTOP 281 is particularly well adapted for our BAMOFLU, BAMOTUR, BAMOMATIC, FFG, MICRO-STREAM and all counters with pulse signal output with a frequency above 1 Hz.
|
Main power: 85 to 250 V AC - 48 to 62 Hz - 6.5 VA
Sensor supply: 12 V CC ± 25% / 60 mA as a maximum
Electrical connections: Screw connectors
Frequency range: Scalable between 1 to 25 kHz
Output: 0/4 - 20 mA (maximal 500 ?)
or 0-5/10 V (minimal 1 k?)
Accuracy: ± 0.1 %
Resolution: 5 µA min / 3.5 mV min
Response time: Adjustable from 5 ms to 10 s
Ambient temperature: 0 to 50°C (storage – 40...+80°C) |
|
 |
Frequency signal to current signal converter
BAMOTOP 281 |
General Catalogue
281-01 |
|
|